Links

Thursday, February 2, 2012

DIY Ballet Barre from PVC for Less Than $15

Do you have a little (or big) girl who loves ballet? Help her practice at home by making this simple PVC ballet barre.


We chose to make ours with some "growing room" for our then 7-year-old, so we put the placement of the lower bar just below her shoulder level so that she could use the higher bar when she grew taller. You will want to use your own measurements to customize your ballet barre to the size of your dancer. Decide how high and how long you want your barre to figure just how much PVC pipe you'll need.

Quick tip: While you don't need to align the base in the same manner we did, DO make sure it is wide enough that the barre will not tip over when leaned on!

If you don't feel comfortable cutting the pipe yourself, many hardware suppliers will cut the pipe for you - remember to bring your measurements!

What You Need:
PVC Cement
Hack Saw or PVC Cutting Tool
Measuring Tape
Pencil
Paint (optional)
1.5" PVC Pipe (supports - both horizontal and vertical)
1" PVC Pipe (Cross Bars)
(4) 1.5" T Connecters
(6) 1.5" 90-Degree "Elbow" Connecters
(4) 1.5"-to-1" Reducers (Connects the 1" pipe to the 1.5" pipe)

Working with PVC is quite simple. As long as you have a clear idea of what part goes where, it doesn't really matter what order you put the barre together in.


Happy Dancing!

*

6 comments:

  1. Thank you so much for posting this. I'm going to attempt to make one for my little girl. Thanks!

    ReplyDelete
  2. howdy, thanks for posting!
    Say how do you find the thing holds steady-wise?
    Do you need to anchor it? if so, what have you found works?

    thanks & peace
    Rich

    ReplyDelete
    Replies
    1. Celtic - this holds very steady. Of course it's not meant for a child to climb on or try acrobatics on - and young children must be warned about that. Our own daughter did climb on hers a few times, but it never turned over :)

      Delete
  3. Very fantastic barre .
    i like this thanks for share .
    for more you can see my site .



    Ballet barre | Ballet clothing

    ReplyDelete
  4. We found it way too flimsy for our 14 year old. We filled the legs with cement, which then worked perfectly. And rather than the 4 elbows on the bottom, we bought 4 end caps for $17ish to cap the bottoms and make it more level on the bottom, rather than have the middle T raised off the floor.

    ReplyDelete
  5. Is this something that would be difficult to disassemble and reassemble? My daughter dances in the living room and it would be an eye sore to have it sitting there outside of her ballet time.

    ReplyDelete